Origin	Spain
Brand Name	Europea de Pinturas Especiales, S.L.

PHOSPHATE PRIMER OF BUTYRAL POLYVINYL

Product description

-          Definition: Priming of two components produced from polyvinyl butyral resin and an acid catalyst, leading anti-corrosive pigments in its formulation.

-          Use: For , stainless steel, aluminum and all types of light alloys and metallized surfaces, where it gets a perfect anchorage and be able to subsequent . 

-          Properties: Dries very fast. on all types of metal bracket.

Technical information

Aspect……………………………..MATT

Color………………………………YELLOWISH

Density…………………………….0.9 Kg/Lt

Viscosity…………………………...55 – 60 K.U.

Volume solids……………………..10 %

Proportion mix……………………..4/1 (by volume)

8 MICRONS

Theoretical performance..................12,5 M²/Lt

Drying 20 ºC/70% RH

         Touch.......................................5 MINUTES

         Overall……………………….30 MINUTES

         Repaint……………………… 6 HOURS

Application Instructions

·         Method

      Brush, Roller, Airbrush gun, Air-Less.

·         Dilution

Dilute between 5 and 10 % with Wash-Primer Solvent.

·         Cleaning

After use, clean all equipment with our S.G. Solvent.

Surfaces preparation:

Applied directly onto the surface to be treated, it must be clean of dust and degreased.

Hygiene and security

·         It is recommended the most appropriate respiratory protection to each case by the corresponding mask.

·         Avoid prolonged inhalation of solvent vapors.

·         During the application have adequate ventilation and maintain a constant air renewal.

·         Avoid eye and skin contact, if product comes in contact with skin, wash with soap and water. 

·         If the product splashes eyes, rinse with water several times; always consult your doctor or the National Institute of Toxicology, Phone Number 91 – 562.84.69.

    Comments

*        When performance practical calculation take place it is necessary to be considered product losses by surface irregularities and application system.

*        The solvent addiction proportionally modifies the solid content in the paint and therefore the thickness of wet film.

*        Our Technical Department will be pleased to answer as many as questions that you are planning to ask.

Our technical service is at your disposal for further information in this booklet as well as to advise on special treatments, systems, process and the best products, according to the surface, environments and needs they wish to cover.

In this sheet, we just trying to inform and advice to our best knowledge, based on experience and research. We cannot be responsible for the consequences of using this product when application conditions and circumstances fall out of our reach and control.