Origin	Spain
Brand Name	Europea de Pinturas Especiales, S.L.

VIAL - 80

Product description

-          Definition: It is chlorinated rubber paint, very adherent and specially indicated for pavement signal.

-          Use: For their extraordinary properties, is a product used for all types of urban signage, industrial, garages, road signs in Public Works, Highways, Viaducts, Civil Works in general, zebra steps, curbs, metal signals weakly primed with LYMUSE, concrete, asbestos cement, Indoor Sports Facilities, etc.. 

-          Properties: In all its uses, it can have excellent resistance to weathering and corrosion, as well as good finish and extraordinary aspect. Adheres on pavements, paved, asphalt and resists abrasion. Supports the steps of constant friction truck, braking, pneumatic tires, etc.. It has good resistance to the outside. It has good resistance to the outside. Equally resistant to dilute acids and alkalis on a regular basis.

Technical information

Color……………………………….WHITE, RED and YELLOW

Density…………………………….1.29 Kg/Lt

Viscosity…………………………...100 ± 10” FORD CUP 4

Volume solids……………………...58%   

Recommended thickness..................50 - 60 micron

Theoretical performance...................5 M²/Lt

Drying 20 ºC/70% RH

         Touch........................................45 MINUTES

         Overall ……………………….12 HOURS

         Repaint ……………………….24 HOURS

Application Instructions

·         Method

Brush, Roller, Airbrush gun and Air-Less.

·         Dilution

      If necessary use our Solvent S.G.

·         Cleaning

After use, clean all equipment with our Solvent S.G.

Surfaces preparation

It should apply in all cases, on clean surfaces, dry and free from grease, dust and humidity. It is convenient mix the product thoroughly before application, stirring five minutes with a clean dry stick.

Hygiene and security

·         Being a flammable product, keep way from sparks and flames.

·         It is recommended the most appropriate respiratory protection to each case by the corresponding mask.

·         Avoid prolonged inhalation of solvent vapors.

·         During the application have adequate ventilation and maintain a constant air renewal.

·         Avoid eye and skin contact, if product comes in contact with skin, wash with soap and water. 

·         If the product splashes eyes, rinse with water several times; always consult your doctor or the National Institute of Toxicology, Phone Number 91 – 562.84.69.

Comments

*        When performance practical calculation take place it is necessary to be considered product losses by surface irregularities and application system.

*        The solvent addiction proportionally modifies the solid content in the paint and therefore the thickness of wet film.

*        Our Technical Department will be pleased to answer as many as questions that you are planning to ask.

Our technical service is at your disposal for further information in this booklet as well as to advise on special treatments, systems, process and the best products, according to the surface, environments and needs they wish to cover.

In this sheet, we just trying to inform and advice to our best knowledge, based on experience and research. We cannot be responsible for the consequences of using this product when application conditions and circumstances fall out of our reach and control.