Origin	Spain
Brand Name	Europea de Pinturas Especiales, S.L.

Product description

-          Definition:

-          Use: On masonry surfaces (plaster, stucco, cement, brick, concrete…) and where mildew may occur. 

-          Properties: and . It features and weather, with of great power. It is characterized by its high performance, whiteness, covering and washability. Due to a balanced viscosity profile and the great power of moisture retention is achieved a perfect application even on absorbent base coat. 

Technical information

Aspect……………………………..MATTE

Color………………………………SNOW WHITE

Density…………………………….1,5 Kg/Lt

Viscosity…………………………..110 K.U. at 25º C

Theoretical performance..................10 M²/Kg and COAT, ACC SURFACE.

Drying 20 ºC/70% RH

         Touch.......................................1 HOUR

 Repaint……………………….2 - 3 HOURS

Application Instructions

·         Brush and roller

It can be diluted up to 5 %. 

·         Airbrush gun

It is diluted in the range of 5 to 10 %.

Pressure: 3 – 4 Kg/cm² Nozzle: 1,5 - 2 mm.

·         Airless spray

It is diluted in the range 5-10%

Pressure: 170 – 180 Kg/cm² Nozzle: 0,35 - 0,45 mm.

·         Cleaning material and dilution

Clean with water immediately after use.

Surfaces preparation:

Remove imperfections and adhesions, sanding to remove nitrate deposits, grease, old paint, dust ... 

• NEW SURFACES.

1 – HARD and DRY SURFACES of interior and exterior masonry. Apply TWO HANDS ( of INTERIOR ANTI MOLD.

2 - SOFT SURFACES or VERY ABSORBENT. Apply one coat of VITREN SEALER and then TWO COATS of INTERIOR ANTI MOLD.

• RECOATINGS on TEMPERA, OLD PAINTINGS, ETC.

After removing the peeling, tempera, lime… apply TWO HANDS (the first one diluted to 10% and the second undiluted or up to 5 %) of INTERIOR ANTI MOLD.        

Hygiene and security

·         Non-flammable product.

·         Because contain no toxic product, no precautions are necessary in this regard.

·         If applied by spray mask is recommended.

·         It should not apply in very cold weather where there are temperatures below or close to 0 º C.

·         Preserves the paint can of frost.

Our technical service is at your disposal for further information in this booklet as well as to advise on special treatments, systems, process and the best products, according to the surface, environments and needs they wish to cover.

In this sheet, we just trying to inform and advice to our best knowledge, based on experience and research. We cannot be responsible for the consequences of using this product when application conditions and circumstances fall out of our reach and control.