Origin	Spain
Brand Name	Europea de Pinturas Especiales, S.L.

POLYESTER PUTTY  

Product description

-          Definition: Polyester Putty with two components, catalyzed with di-benzoyl peroxide.

-          Use: In all work where cap or cover openings of some importance is required. Plate leveler in car body work, shipbuilding, etc. 

-          Properties: , , and easy to polish and paint, etc.. 

Technical information

Color……………………………….GRAY

Density…………………………….2.48 Kg/Lt

Recommended thickness…………..ACC CASES

Theoretical performance..................THICKNESS TO 50 MICRONS = 1.5 M²/1.5 Kgs.

Drying 20 ºC/70% RH

         Touch.......................................15 MINUTES

         Overall……………………….1.5 HOURS

         Repaint……………………....3 HOURS

         Sand…………………………30 MINUTES

Application Instructions

On a steel spatula COMBINE component "A" to "B" (peroxide) in the amount indicated in the can and as needed. If we put more catalyst (peroxide) obtains better drying, hardness and less flexibility.

·         Cleaning

After use, clean all equipment with our S.G. Solvent.

Surfaces preparation:

IRON AND STEEL: Surface must be clean, dry and degreased prior to application of H-25 2 / C

Hygiene and security

·         It is recommended the most appropriate respiratory protection to each case by the corresponding mask.

·         Avoid prolonged inhalation of solvent vapors.

·         During the application have adequate ventilation and maintain a constant air renewal.

·         Avoid eye and skin contact, if product comes in contact with skin, wash with soap and water. 

·         If the product splashes eyes, rinse with water several times; always consult your doctor or the National Institute of Toxicology, Phone Number 91 – 562.84.69.

    Comments

*        When performance practical calculation take place it is necessary to be considered product losses by surface irregularities and application system.

*        The solvent addiction proportionally modifies the solid content in the paint and therefore the thickness of wet film.

*        Our Technical Department will be pleased to answer as many as questions that you are planning to ask.

Our technical service is at your disposal for further information in this booklet as well as to advise on special treatments, systems, process and the best products, according to the surface, environments and needs they wish to cover.

In this sheet, we just trying to inform and advice to our best knowledge, based on experience and research. We cannot be responsible for the consequences of using this product when application conditions and circumstances fall out of our reach and control.