Origin	Spain
Brand Name	Europea de Pinturas Especiales, S.L.

INTA STANDARD 16.44.10.

Product description

-          Definition:  Painting made from silicone-base resins with aluminum pigments of high temperature resistance.

-          Use: On all kinds of metal objects that will be subject to alternate or continuous mode at very high temperatures, such as chimneys, burners, steam pipes, furnaces, silencers, exhaust pipes, etc..

-          Properties: . The film once dry provides a and .     

Technical information

Aspect……………………………...BRIGHT

Color……………………………….ALUMINUM GRAY.

Density…………………………….1 Kg/Lt

Viscosity…………………………...60” FORD Nº 4.

Volume solids……………………...28%   

Recommended thickness...................20 micron

Theoretical performance...................14 M²/Lt

Drying 20 ºC/70% RH

         Touch........................................10 minutes

         Overall ……………………….30 minutes

         Repaint ……………………….2 hours

Application Instructions

·         Method

      Brush, Roller, Airbrush gun, Air-Less

·         Dilution

If necessary use our Solvent S. G.

·         Cleaning

After use, clean all equipment with our Solvent S. G.

+MECHANIC TESTS FOR 24 HOURS

-  THICKNESS ......................................25-30 μ

- HARDNESS .......................................PERSOZ 180 " 

- DRAWING .........................................................ERICHSSEM 6 mm

- IMPACT……………………………...20/70

- BENDING……………………………5,5 mm

- ADHESION………………………….100%

Surfaces preparation

The surface to paint would be cleaned by sandblasting to a 2 ½ S grade. If it was not possible to reach that level of cleanliness must be degreased and cleaned off any corrosion manually.  If the whole system is subjected to temperatures of 150 - 200 ° C it should promote the cured.  

Hygiene and security

·         Being a flammable product, keep way from sparks and flames.

·         It is recommended the most appropriate respiratory protection to each case by the corresponding mask.

·         Avoid prolonged inhalation of solvent vapors.

·         During the application have adequate ventilation and maintain a constant air renewal.

·         Avoid eye and skin contact, if product comes in contact with skin, wash with soap and water. 

·         If the product splashes eyes, rinse with water several times; always consult your doctor or the National Institute of Toxicology, Phone Number 91 – 562.84.69.

Comments

*        When performance practical calculation take place it is necessary to be considered product losses by surface irregularities and application system.

*        The solvent addiction proportionally modifies the solid content in the paint and therefore the thickness of wet film.

*        Our Technical Department will be pleased to answer as many as questions that you are planning to ask.

Our technical service is at your disposal for further information in this booklet as well as to advise on special treatments, systems, process and the best products, according to the surface, environments and needs they wish to cover.

In this sheet, we just trying to inform and advice to our best knowledge, based on experience and research. We cannot be responsible for the consequences of using this product when application conditions and circumstances fall out of our reach and control.